Description
The nXDS10i dry scroll vacuum pump is the best performing pump in its class.
Features:
- Advanced scroll-form and tip-seal technologies – deliver best‑in-class vacuum performance and unrivalled ultimate vacuum levels.
- Unique tip seal design – significantly reduces wear to minimize maintenance and extend service life.
- Quiet operation – with typical noise during operation < 52 dB(A) for minimal environmental impact.
- Advanced interface – providing a variety of traditional and analogue and digital control methods enabling remote control/monitoring via RS232 or RS485
Applications:
- Backing turbomolecular pumps
- Chamber evacuation
- Chemical applications including gel dryers and solvent recovery
- Electron microscopy
- High energy physics
- Mass spectrometry
Downloads:
Technical Data:
| Technical Data | nXDS10i |
|---|---|
| Nominal rotational speed | 1800 rpm |
| Displacement | 12.7 m3/h (7.5 ft3/min) |
| Peak pumping speed | 11.4 m3/h (6.7 ft3/min) |
| Ultimate vacuum (total pressure) | 0.007 mbar (0.005 Torr) |
| Max inlet pressure for water vapor | 35 mbar |
| Max water vapor pumping rate | 145 g/h |
| Maximum continuous inlet pressure | 200 mbar |
| Voltage input | 100-127 V/200-240 V |
| Voltage frequency | 50/60 Hz |
| Motor power | 280 W |
| Power connector | IEC EN60320 C13 |
| Recommended fuse | 10 A, 250 Vac rms |
| Weight | 25.8 kg (57 lbs) |
| Inlet flange | NW25 |
| Exhaust flange | NW25 |
| Noise level | 52 dB(A) |
| Vibration at inlet flange | < 4.5 mm/s(rms) |
| Leak tightness (static) | < 1×10-6 mbar l/s |
| Operating temperature range | 5 to 40 °C (41 to 104 °F) |
